KD1MU 12.8 Volt 12AH LiFePo Battery

Description

Technical Details:

• Quality LiFePP4 Battery for on-the-air portable operation
• Low Noise. Designed for HF Radio.
• Power Pole power connection (output only)
• 6 cm 14 AWG power output cable from the battery to the Power Pole conectors.
• Nominal 12.8 volts, 12AH capacity (153.6 WH)
• 3000 charging cycles (discharging to 90%)
• 20amp Power Plate capable of
• 20amp continuous current
• Designed to provide 40amp in 2 sec peaks.
• Weighs 1.35 kilos / 3 lbs.
• 5mm x 2.1mm charging connector female or male charging cable and adapter.
• Charge with a Low Noise 14.6 Volt, 3A Charger. Max charging current is 5A.
• Battery covering is water repellent, but not waterproof.
• The Battery does not require any maintenance except for charging.
• Use a charger designed for LiFePO4 batteries only.
• Operating temperature: Between -20°C to 60°C (-4°F to 140°F)
• The Battery BMS will protect the battery by cutting off power in the following conditions:
  1. Overheat
  2. Temperatures below operating conditions.
  3. Short circuit
  4. Overcharging (above 14.3 volts)
  5. Low voltage (under 9.2 volts)

• When using a solar charger, make sure your controller unit is designed for LiFePO4 batteries.
• The solar controller must provide 14.6 volts DC output.
• Battery may be in service and charged at the same time.
• Dimensions: 140 X 70 X 70 mm (5.5 X 2.75 X 2.75 inches)